TMO Voice Services 3-69
March 2009 Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual 6866588D21-D
18.3.11 Rx Hold Timer
This entry determines the time period, in msecs, for how long the call will be monitored after it was
released by system in order for the user to hear the answer to a question. During this period of time,
a group call with lower priority than the on-going call will be rejected.
To activate this timer ensure the Presentation Mode option is set to “Force”.
The default is 5000 msecs.
Related fields are:
Paragraph 14.14 "Talkgroup Scan"
Paragraph 28.2 "One-Touch Options"
Paragraph 28.3.17 "TMO Talkgroup Scan"
18.3.12 Scan List On/Off Over the Air
If enabled the terminal is able to send its scan list to the system.
18.4 Voice Services Options
This menu has the following options:
18.4.1 Default Call Priority
This Indicates the priority level of a call (before transmission begins). This field is non-editable.
To Next Page
Loading...
