1-12 Product Overview
6866588D21-D Chapter 1 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
4.2 ATEX Specifications
The terminals have the following ATEX ratings:
4.3 RF Specifications
4.4 GPS Specifications
Terminal Rating Specifications
MTP850 Ex - 2D ATEX
• Gas: II 2G Ex ib IIC T4
Category 2, Approved for Zone 1, Equipment group II,
Gas group C, Temperature class T4, T
amb
-20° C to +50° C
• Dust: II 2D Ex ibD 21 IP6x T90°C
Category 2, Approved for Zone 21, 22, Equipment group II
MTP850 Ex - 3D ATEX
• Gas: II 2G Ex ib IIC T4
Category 2, Approved for Zone 1, Equipment group II,
Gas group C, Temperature class T4, T
amb
-20° C to +50° C
• Dust: II 3D Ex ibD 22 IP5x T90°C
Category 3, Approved for Zone 22, Equipment group II
MTP810 Ex ATEX
• Gas: II 2G Ex ib IIA T3
Category 2, Approved for Zone 1, Equipment group II,
Gas group A, Temperature class T3, T
amb
-20° C to +50° C
• Dust: II 3D Ex ibD 22 IP5x T90°C
Category 3, Approved for Zone 22, Equipment group II
Title Specifications
Frequency Bands MHz 380 - 430 MHz
RF Channel Bandwidth kHz 25
Switching Bandwidth TMO MHz 50
Switching Bandwidth DMO MHz 50
RF Power Control 3 steps of 5 dB
Transmitter RF Output Power W 1
RF Power Level Accuracy +/- dB 2
Receiver Class A and B
Receiver Static Sensitivity dBm -112 minimum (-115 typical)
Receiver Dynamic Sensitivity dBm -103 minimum (-107 typical)
Title Specification
Simultaneous Satellites 12
Mode of Operation Autonomous or Assisted (A-GPS)