Motorola MTP850 Ex - 7.5 Erase Software; 7.6 Restore Radio

Tools Menu (Administrator Login) 3-25
March 2009 Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual 6866588D21-D
7.5 Erase Software
This option is used Erase Software.
1. Open the Tools menu and click on the Erase Software function.
2. The CPS starts reading the codeplug file from the phone. (Click the Cancel button here to
interrupt the Read and Erase Software operations.)
3. The CPS continues the Erase Software operation till successful completion.
7.6 Restore Radio
The CPS is able to restore the attached terminal if its codeplug has been saved as backup file if the
Write Software function or Upgrade by Software operation failed.
Required inputs are:
• Attached terminal
• Backup codeplug file.
Processing
1. Launch this function either from the Menu bar, or by using the keyboard shortcut (Ctrl+D).
2. The CPS will read the codeplug from the attached terminal and determine its Serial Number.
3. The reading in progress will be displayed. It is possible to cancelling the read operation.
4. The CPS will look for the backup codeplug file according to the Radio Serial Number, at the
path indicated in the Default Backup Path field in the Directories Options dialogue box.
5. When the backup codeplug file is found, the CPS will read the name of the Software file from
the Application Image<Application_Image>fieldhlp field of the codeplug, and the user prompt
will ask for confirmation to write the codeplug and software to the terminal, or cancel the oper-
ation.
6. If confirmed, the Restore Radio function will proceed in the following order:
• The software application will be written
• Then the codeplug is written.
The writing progress for both the software and codeplug will be displayed on screen.
7. An appropriate message will be displayed, notifying the success or failure of this operation.
Note: If the backup file does not exist in the Backup directory, or if the software application file has
not been found in the SW directory, then an error message will be displayed to indicate the
problem and the operation will be aborted. The operation will also be impossible if the
‘Application Image’ field of the codeplug is empty.
Outputs
Restored terminal.