3-26 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
7.7 Languages
Determines which languages are enabled in the terminal.
Note: The CPS will display only those codeplug blocks and programming options that are applicable
to the active phone model.
The Default Software Path must point to a folder containing the z19 files containing language
information. Refer to Paragraph 7.8.4.4 "Directories"
One of 4 options can be selected:
• European, Greek
• European, Arabic
• Chinese
• Korean
Press Write button. Selected software will be flashed to terminal. All software packs that existed on
the terminal before will be over written, except for local language pack. This pack will remain in
terminal.
7.8 Configure
This menu enables the computer preferences to be set.
To Next Page
Loading...
