3-32 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
Note: Refer to your computer User Manual for a complete description of serial and parallel ports
7.8.4.4 Directories
This is used to specify the default paths of the directories for codeplug, software and backup files.
Note: If there are several versions of Tetra CPS installed on the PC, these paths MUST be
configured as soon as the CPS is first launched, as the paths may default to existing
directories.
This page lists three fields displaying the last selected path:
• Default Data Path — specifies the default path to the drive and folder (or directory) where the
codeplug file is located.
To Next Page
Loading...
