Motorola MTP850 Ex - 27.3 TNP1 Options; 27.3.1 TNP1 Support; 27.3.2 NO TE TEMTA-REPORT IND Counter Limit; 27.3.3 TE TEMTA-REPORT IND Timer

3-128 Customer Programming Software (CPS)
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual March 2009
Each cell has the structure of information element “SDS (Short Data Service) Control”.
27.3 TNP1 Options
This menu is used to set the button/key functionality and it has the following options:
27.3.1 TNP1 Support
The TNP1 feature operates only when Packet Data or External Device is enabled in the codeplug
(for example: a PPP session with MT2 can be estabilished).
Turn the check box (Enable) or off (Disable) by clicking in the check box.
27.3.2 NO TE TEMTA-REPORT IND Counter Limit
This is a Service Profile timer. MT2 terminates its PPP link with TE2 and resets to zero he NO
TEMTA-REPORT IND counter when the counter reaches its maximum value.
The range of this timer is 1 to 100.
27.3.3 TE TEMTA-REPORT IND Timer
This is a Service Profile timer. MT2 uses TE TEMTA-REPORT IND timer in combination with
NO TEMTA-REPORT IND counter over limit to decide when to terminate the PPP link
The range of this timer is 1 to 300.