Ergonomic Parameters 3-85
March 2009 Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual 6866588D21-D
The timer is disabled when set to zero.
20.3.2 Long Key Inactivity Timer
This timer defines the time duration of no user input/activity, for example a button press, after which
the terminal will return to its default mode.
The range setting for this timer is from 0 - 60 seconds and is disabled when the field entry is set to 0
(zero). The default setting is 30 seconds,
20.3.3 Channel Acquisition Timer
This is the period of time the phone waits before it advises the user it is out of service, not attached,
or is in local area service.
The range for this timer is 0 - 300 seconds, the default setting is 30 seconds.
20.3.4 Call Delay on User Activity
This field defines the amount of time after a user action during which all incoming (non-emergency)
group calls are ignored (not joined).
The range for this timer is 5000 - 5000 msec, the default setting is 5000 msec.
20.4 Dialing Methods
This menu sets the dialing method parameters. These are a set of options that control the way the
Terminal behaves when the user dials a number.
20.4.1 Default Call Type
This option defines the first call type that will appear on the idle display when the user starts dialing.
The call type is one of the following: Private/Phone/PABX.
First in Type Order: If this option is chosen, the first Call Type defined in the Type Order field will
always be the first type offered to the user when he/she begins to dial.
Last Active: If this option is chosen, the Call Type of the last active call will be the first type offered to
the user when dialing.
To Next Page
Loading...
