Snohomish County PUD Radio Operations Manual • Rev. 6/03
46
Section II
5. If the party you are calling answers,
carry on with your conversation in
the normal radio manner: press the
PTT Switch to talk; release the PTT
Switch to listen.
6. When you have finished your con-
versation, or if the number you are
calling does not answer or is not in
service, press the HOME key to
send the hang-up code.
Answering a Private Call
Yo u D o T h e Radio Does
When your radio receives a Private
Call, you will hear two alert tones
[repeating every 5 seconds for 20 sec-
onds], and the display will alternate
between “CALL RECEIVED” and the
current Talkgroup. The green LED and
If you press the PTT Switch
before call received status annunciator will
you select “CALL” from the menu, flash to indicate that a call is being
the response will be transmitted received. You will have 15-20 seconds
to everyone in your Talkgroup, but to answer the call before the radio
the person calling you will NOT be automatically returns to the current
able to hear you. Talkgroup.
1. To answer the call privately, press
the right arrow key [>] until
“CALL” appears in the display.
After viewing the caller’s ID num-
ber, you can decide to either talk
privately [go to step 2], or not
answer the call by letting the re-
mainder of the 20 seconds elapse
and returning to the current
Talkgroup.
The radio will return to the current
Talkgroup
The display shows 3 choices: for
example, “CALL,” “PAGE,” and
“PHON.”
The display will show the incoming
caller’s ID number, and the call re-
ceived annunciator will turn off. The
caller’s ID number will remain on the
display for the duration of the call.
To Next Page
Loading...
Need help?
General
