Snohomish County PUD Radio Operations Manual • Rev. 6/03
74
Section V
When the computer system returns to normal operation, the radio will auto-
matically leave the failsoft operation and return to computerized operation.
Identifying Controls and Buttons
Identify the various parts of your radio below, then refer to the sections named for
more information about features and functions they perform and how to use
them. Refer to drawing on next page.
Name Use Refer To
A. On/Off/Volume Push the button in to turn the radio
Control on and turn control to adjust the
volume level of incoming transmis-
sions.
B. LED Status Indicates the radio operating status:
Indicators Green, flashing - incoming Call
or Page.
Red, continuous - radio transmitting.
Orange, continuous - system busy
C. Display Provides visual information about
many of the radio’s features and status.
D. Talkgroup Selects the operating Talkgroup
Selector Control or Zone.
E. Microphone Accepts voice input to the radio.
F. Push-To-Talk Engages the transmitter and puts
(PTT) Switch the radio in the transmit mode. Push
to talk, release to listen.
G. Microphone Plug-in for microphone.
Connector
Section VI:
Turning the
Mobile Radio
On or Off
Section V:
Intepreting the
Display
Section V:
Intepreting the
Display
Section VI:
Selecting a
Talkgroup and
Section V:
What is a
Talkgroup?
Section VI:
Transmission
Procedures
Section VI:
Transmission
Procedures
Section VI:
Transmission
Procedures
To Next Page
Loading...
Need help?
General
