3 Remove the battery cover completely from the radio.
To attach the battery cover:
NOTICE: Ensure that the Battery Cover Latch is at the Unlock position before attaching the
battery cover.
4 Insert the bottom tabs of the battery cover into the slot.
5 Press down on the middle part follow by the top part of the battery cover until it clicks.
2.2.3
Installing the SIM Card
Prerequisites:
Ensure that your radio is either MicroSD card-enabled or SIM card-enabled. The SIM card feature is
only available for SIM card-enabled radios.
Procedure:
1 Remove the battery cover and battery.
2 Flip open the SIM/microSD door of the radio.
MN002958A01-AF
Chapter 2: Getting Started
15
To Next Page
Loading...
