4.14.1
Enabling or Disabling SIM Card End-to-End Encryption
Prerequisites:
Your radio is either MicroSD card-enabled or SIM card-enabled. The SIM card End-to-End Encryption
feature is only available for SIM card-enabled radios.
Ensure that:
• the SIM card is inserted in the radio.
• the radio is not in an active call.
• you cannot press the PTT button.
Procedure:
To enable or disable the SIM card End-to-End Encryption, choose one of the following ways:
If… Then…
If the One-Touch button is configured by
your service provider,
press the One-Touch button.
If you want to operate from the menu, perform the following actions:
a Press Menu → Crypto Menu → Crypto
Function.
b Select Encryption On to enable or En-
cryption Off to disable encryption.
Your radio displays prompts indicating your current encryption state: an appropriate status icon
and the Encryption On or Encryption Off message.
4.14.2
Enabling or Disabling CRYPTR Micro End-to-End Encryption
Prerequisites:
NOTICE: Your radio is either MicroSD card-enabled or SIM card-enabled. This feature is only
available for MicroSD card-enabled radio.
• Ensure that the CRYPTR Micro card is inserted in the radio.
• The radio is not in an active call.
• You cannot press the PTT button.
See CRYPTR Micro End-to-End Encryption on page 80.
Procedure:
1 From the home screen, press Menu → Crypto Menu → Crypto Function.
2 Select Encryption On to enable or Encryption Off to disable encryption.
Your radio displays a status icon and the Encryption On or Encryption Off message to indicate
your current encryption state.
MN002958A01-AF
Chapter 4: Main Menu
76
To Next Page
Loading...
Need help?
General
