6 Close the microSD card holder and slide it to the lock position.
7 Close the metal cover door.
IMPORTANT: Please ensure that the latch on the metal cover door is locked in place
before placing the battery into the radio.
8 Install the battery.
NOTICE: Due to a delicate construction of the SIM/microSD card slot, do not insert or
remove the microSD card unnecessarily, as it may damage the mechanism of the reader.
For copying files from the radio, use the USB Mass Storage Mode.
2.2.5.2
Removing the MicroSD Card
Procedure:
1 Remove the battery.
2 Flip open the metal cover door of the radio.
MN002958A01-AF
Chapter 2: Getting Started
20
To Next Page
Loading...
Need help?
General
