EasyManua.ls Logo

Motorola ST7000 - Installing the MicroSD Card

Motorola ST7000
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTICE:
The radio only supports the following characters to compose file names:
1 Numeric digits.
2 English alphabetic characters.
3 Space.
4 Non-alphabetic characters: ! # $ % & ' ( ) - @ ^ _ ` { } ~.
Before using non-alphabetic characters, make sure your computer system supports them.
To achieve the best radio performance, use microSD cards with the minimum write speed of at
least 6 MB/s (Class 6 or higher). Cards with the write speed lower than 6 MB/s slow down the
performance of the radio.
2.2.5.1
Installing the MicroSD Card
Prerequisites:
NOTICE: Your radio is either MicroSD card-enabled or SIM card-enabled. This feature is only
available for MicroSD card-enabled radio.
Procedure:
1 Remove the battery.
2 Flip open the metal cover door of the radio.
3 Slide to unlock the microSD card holder as indicated by the marking engraved on the microSD
card holder.
4 Flip open the microSD card holder.
5 Carefully insert the microSD card into the microSD card holder ensuring that the gold contact
area is facing down.
MN002958A01-AF
Chapter 2: Getting Started
19

Table of Contents

Other manuals for Motorola ST7000

Related product manuals