Message Message Description
er incoming and outgoing call and data services are
blocked.
List Empty
There are no programmed entries in the scrolling list. Type
the entry.
List Not Attached
All talkgroups in the scan list are not attached.
List Partially Attached
The scan list is active, but not all talkgroups are attached
to it.
No Service
Your radio is outside coverage. Return to coverage.
Not allowed in repeater
mode
The service or feature is not available in the Repeater
Mode..
My Groups
Is Empty
You cannot view/delete groups when the My Groups fold-
er is empty.
Network Trouble
Network problems. Please try again later.
No Answer
The called party does not answer.
No Entries
This message is displayed when accessing an empty list.
No Group
• Attachment failed. Your radio detached from current
talkgroup. Please wait until it attaches again to the cur-
rent talkgroup.
• Displayed when you are out of the normal coverage
area of your selected talkgroup. Please select a new
talkgroup that is valid for your working location.
• Indicates a favorite group was removed from the My
Groups folder.
No List
The network list is empty.
No Selected Scan List
You selected an empty network list.
No Service
Your radio is out of coverage.
Not Allowed To Initiate
Call
You are not allowed to dial a number which is not in the
address book.
Not Allowed To Transmit
Release the PTT button and try again later. You are not al-
lowed to send a text message or a status message to a
number which is not in the address book.
Single TalkGroup Only
There is only one programmed entry in the scrolling list.
Overheating, Please Turn
Radio Off
Your radio turns off. Keep it turned off for 5 minutes.
Party Busy
Called radio is busy.
Party Not Available
Called radio is out-of-range or turned off. Please try again
later.
Please Try Again
You could not call.
Please Wait Connecting
A message during startup.
MN002958A01-AF
Appendix C: Troubleshooting
89
To Next Page
Loading...
