Moxa Technologies AWK Series

AWK Series User Manual
101
Add a New Layer 3 Firewall Rule
To add a new Layer 3 firewall rule, click the Add icon.
Configure the following settings:
Rule Status
Setting
Description
Factory Default
Enabled/Disabled
Enable or disable the Layer 3 firewall rule.
Disabled
Priority
Setting
Description
Factory Default
1 to 64
Specify the priority for this rule.
1
Default Action
Setting
Description
Factory Default
Accept
Packets that match the policy rule will be allowed.
Accept
Drop
Packets that match the policy rule will be denied.