Moxa Technologies AWK Series User Manual

AWK Series User Manual
140
IP Address (for Static mode only)
Setting
Description
Factory Default
IP address
Enter the AWK’s IP address.
192.168.127.253
Subnet Mask (for Static mode only)
Setting
Description
Factory Default
Subnet mask
Select the subnet mask. This is used to identify the type of
network the AWK is connected to (e.g., 255.255.0.0 for a
Class B network, or 255.255.255.0 for a Class C network).
24 (255.255.255.0)
Default Gateway (for Static mode only)
Setting
Description
Factory Default
IP address
Enter the IP address of the router that connects the LAN to an
outside network.
None
DNS Server 1 and DNS Server 2 (for Static mode only)
Setting
Description
Factory Default
IP address
Enter the primary and secondary DNS server address. After
entering the DNS server’s IP
address, you can input the AWK’s
URL (e.g., http://ap11.abc.com) in your browser’s address
field instead of entering the IP address. The Secondary DNS
server will be used if the Primary DNS server fails to connect.
None
When finished, click APPLY.
Maintenance and Tools
The user tools and functions are located at the top-right of the interface. Click the three-dot icon in the
upper right corner of the page to open the user menu.
Language
The AWK Series v2.0 firmware and above support language localization. Administrators can select the
display language of the web interface from the drop-down menu. The AWK supports the following
languages: English, Simplified Chinese, Traditional Chinese, and Japanese. The default is English.

Moxa Technologies AWK Series Specifications

General

Brand	Moxa Technologies
Model	AWK Series
Category	Network Hardware
Language	English