Moxa Technologies AWK Series

AWK Series User Manual
134
Wi-Fi Basic
Configure the following settings:
Operation Mode
Setting
Description
Factory Default
Disabled
Disable the operation mode.
Disabled
AP
Specify the operation mode as AP. Refer to AP Mode
Settings.
Master
Specify the operation mode as Master. Refer to Master Mode
Settings.
Client
Specify the operation mode as Client. Refer to Client Mode
Settings.
Client-Router
Specify the operation mode as Client-Router. Refer to Client-
Router Mode Settings.
Slave
Specify the operation mode as Slave. Refer to Slave Mode
Settings.
Environment
Setting
Description
Factory Default
Indoor
Set the application environment to indoor. Available channels
vary depending on the selection.
Indoor
Outdoor
Set the application environment to outdoor. Available channels
vary depending on the selection.
SSID: 2.4 GHZ
SSID Status
Setting
Description
Factory Default
Enabled/Disable
Enable or disable the SSID.
Disabled