SSID
Setting Description Factory Default
1 to 32 characters Enter a name for the SSID. None
Channel (available in AP and Master modes only)
Setting Description Factory Default
1 (2412 MHz) to 11
(2462 MHz)
Select the channel from the drop-down list. Each channel
supports different frequencies.
6 (2437 MHz)
Bonded Channel (available in AP and Master modes only)
10 (read only)
The bonded channel used by the AP will be shown here if
channel width is set to 20/40 MHz.
None
SSID: 5 GHZ
SSID Status
Enable or disable the SSID.
SSID
Setting Description Factory Default
1 to 32 characters Enter a name for the SSID. None
RF Band (for Client, Client-Router, and Slave modes only)
Select 5 GHz as the RF band.
5 GHz
Select 2.4 GHz as the RF band.
Select both 5 GHz and 2.4 GHz as the RF bands.
5 GHz Channel Plan (for Client, Client-Router, and Slave modes only)
Setting Description Factory Default
Channel Select the channel for the 5 GHz band. Any
Channel (for AP and Master modes only)
Setting Description Factory Default
36 (5180 MHz) to 165
(5825 MHz)
Select the channel from the drop-down list. Each channel
supports different frequencies.
36 (5180 MHz)
Bonded Channel (for AP and Master modes only)
40/44/48 (read only)
The bonded channel used by the AP will be shown here if
channel width is set to 36 (5180 GHz).
None
When finished, click NEXT.
To Next Page
Loading...
Need help?
General
