Moxa Technologies AWK Series

AWK Series User Manual
51
Time
From the Time section, you can configure the System Time.
System Time
The System Time screen lets you configure the device time settings and specify the time zone. Click
System Time under Time in the function tree to access this screen.
Edit the Clock
The system clock, time, and date can be set manually, or be synced to an external time server.
Configure the following settings:
ATTENTION
You must select the time zone first before configuring "System Clock" settings, as any changes made to
the time zone after the system clock has been configured will shift the clock offset based on the deviation
of the selected time zone.
Current Time
Setting
Description
Factory Default
Current Time (read
only)
Shows the current time. Current Time
Clock Source
Setting
Description
Factory Default
Internal Clock
Set the clock source to internal. This requires the date and
time to be specified manually.
Internal Clock
NTP
Set the clock source to NTP. This will sync the system clock
with an external NTP server.