Network Status
The Network Status section contains the Network Statistics, LLDP, Bridge Table, and ARP Table
pages.
Network Statistics
The Network Statistics page shows real-time data for all interfaces. Click Network Statistics under
Diagnostics > Network Status in the function tree to access this page.
LLDP
LLDP is an OSI Layer 2 protocol defined by IEEE 802.11AB. LLDP standardizes the self-identification
advertisement method, and allows each networking device, such as a Moxa managed switch or access point,
to periodically send its system and configuration information to its neighbors. Because of this, all LLDP
devices are kept informed of each other’s status and configurations. With SNMP, this information can be
used to generate network visualization.
From the web interface, you can enable or disable LLDP, and set the LLDP transmit interval. In addition, you
can view the neighbor-list, which is reported by its network neighbors.