Moxa Technologies AWK Series User Manual

AWK Series User Manual
124
Security
Setting
Description
Factory Default
None
Do not use any security method.
None
STARTTLS
Use STARTTLS as the security method.
SSL/TLS
Use SSL/TLS as the security method.
Sender Email Address
Setting
Description
Factory Default
Max. 60 characters
Enter the sender’s email address.
None
1st to 5th Email Addresses
Setting
Description
Factory Default
Max. 60 characters
Enter the recipient’s email address. You can set up to five
recipient email addresses to receive alert emails
from the AWK
device.
None
When finished, click APPLY.
Relay Alarm Cut-off
Some events can be triggered by relay. If Relay is set as the notification method in the Notifications
section, you will see the state for that event is Triggered when the corresponding event occurs. Once
triggered, you can cut off the relay to deactivate the event. Click Relay Alarm Cut-off under Diagnostics
> Event Logs and Notifications in the function menu to access this screen.
NOTE
Relay Alarm Cut-off is only supported by the AWK-3252A and AWK-4252A Series.

Moxa Technologies AWK Series Specifications

General

Brand	Moxa Technologies
Model	AWK Series
Category	Network Hardware
Language	English