Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
Type 2
For Type 2, the Action setting on the Rate Limiting page can be set to Drop Packet or Port Disable.
Action
Set the max. ingress rate limit f or ingress packets
Drop Packet
Port Disable
When the ingress packets exceed the ingress rate limit, the
port will be disabled f or a certain period. During this period, all
packets f rom this port will be discarded.
Rate Limiting: Drop Packet
Ingress rate (% of
max. throughput)
Select the ingress rate limit (% of max. throughput) f or all
packets f rom the f ollowing options: Not Limited, 3%, 5%,
10%, 15%, 25%, 35%, 50%, 65%, 85%
Unlimited
Rate Limiting: Port Disable
To Next Page
Loading...
Need help?
General
