ioLogik E1200 Series Introduction
ioLogik E1240
Analog Inputs: 8 channels
Isolation: 3K VDC or 2K Vrms
I/O Mode: Voltage / Current
Input Range: 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA
Accuracy:
± 0.1% FSR @ 25°C
± 0.3% FSR @ -10 and 60°C
± 0.5% FSR @ -40 and 75°C
Sampling Rate:
• All channels: 12 samples/sec
• Per channel: 1.5 samples/sec
• Only one channel enabled: 12 samples/sec
Input Impedance: 10M ohms (min.)
Built-in Resistor for Current Input: 120 ohms
Power Consumption: 121 mA @ 24 VDC
MTBF (mean time between failures)
Database: Telcordia (Bellcore)
ioLogik E1241
Analog Outputs: 4 channels
Isolation: 3K VDC or 2K Vrms
Output Range: 0 to 10 VDC, 4 to 20 mA
Voltage Output: 10 mA (max.)
Accuracy:
± 0.1% FSR @ 25°C
± 0.3% FSR @ -40 and 75°C
Load Resistor:
• Internal resistor: 400 ohms
Note: 24 V of external power required when loading greater than 1000 ohms.
Power Consumption: 194 mA @ 24 VDC
MTBF (mean time between failures)
Database: Telcordia (Bellcore)