Moxa Technologies ioLogik E1200 Series User Manual

ioLogik E1200 Series Using the Web Console
3-22
DO Safe Mode Settings
When a peer-to-peer rule on a local DO channel is not valid, the local DO channel will enter Safe Mode. You can
select Hold Last, ON, or OFF from the Safe Mode Status dropdown menu for each DO channel.
AO Safe Mode Settings
When a peer-to-peer rule of the local AO channel is not valid, the local AO channel will enter Safe Mode. You can
either set the AO channel’s Safe Mode Value from 0–4095, or enable Hold Last Status during Safe Mode by
selecting the checkbox as shown in the following figure:
SNMP
The ioLogik E1200 series remote I/O supports SNMPv1 and SNMPv2c for monitoring network I/O devices with
SNMP network management software, which is useful for building automation and telecommunications
applications.
SNMP Trap
The ioLogik E1200 series remote I/O provides standard SNMP traps and private SNMP traps for I/O devices.
Standard Trap
The ioLogik E1200 series remote I/O provides the following standard SNMP traps:
Trigger Type
Description
coldStart
Sends SNMP trap when the agent reinitializes.
*Restart the measurement epochs because configuration data or MIB variables
may have changed.
warmStart
Sends SNMP trap when the /etc/snmpd.conf file is reread and the agent
reinitializes.
*Do NOT restart the measurement epochs because configuration data or MIB
variable values have not changed. The configuration information in the
/etc/snmpd.conf file is for agent configurations that do not affect SNMP manager
databases.

Moxa Technologies ioLogik E1200 Series Specifications

General

Brand	Moxa Technologies
Model	ioLogik E1200 Series
Category	Network Router
Language	English