Moxa Technologies ioLogik E1200 Series - Product Specifications; Common Specifications

ioLogik E1200 Series Introduction
1-4
Product Specifications
Common Specifications
LAN
Ethernet: 2 x 10/100 Mbps switch ports, RJ45
Protection: 1.5 kV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, HTTP
Power Requirements
Power Input: 24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Wiring: I/O cable max. 14 AWG
Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight: under 200 g
Mounting: DIN rail or wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Safety: UL 508
EMI:
EN 55022; EN 61000-3-2; EN 61000-3-3;
FCC Part 15, Subpart B, Class A
EMS:
EN 55024, EN 61000-4-2, EN 61000-4-3,
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
EN 61000-4-8, EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Green Product: RoHS, CRoHS, WEEE
Hazardous Location: UL/cUL Class I Division 2, ATEX Zone 2 (ioLogik E1214 pending)
Note: Please check Moxa's website for the most up-to-date certification status.
Warranty
Warranty Period: 5 years (excluding ioLogik E1214)
Details: See www.moxa.com/warranty
Note: Because of the limited lifetime of power relays, products that use this component are covered by a 2-year
warranty.