Moxa Technologies ioLogik E1200 Series User Manual

3
3. Using the Web Console
The ioLogik E1200’s main configuration and management utility is the built-in web console, which can be used
to configure a wide range of options.
The following topics are covered in this chapter:
 Introduction to the Web Console
 Overview
 Network Settings for the Web Console
 General Settings
 Ethernet Configuration
 User-Defined Modbus Addressing
 Default Modbus Address
 Active OPC Server Settings
 Tag Generation
 I/O Settings
 DI Channels
 DO Channels
 AI Channels
 AI Input Range
 AO Channels
 RTD Channels
 TC Channels
 System Management
 Accessibility IP List
 Network Connection
 Firmware Update
 Import System Configuration Settings
 Export System Settings
 Peer-to-Peer Networking
 Peer-to-Peer Settings (1-50)
 Sample Peer-to-Peer Configuration
 DO Safe Mode Settings
 AO Safe Mode Settings
 SNMP
 SNMP Trap
 Using SNMP
 Change Password
 Load Factory Defaults
 Save/Restart

Moxa Technologies ioLogik E1200 Series Specifications

General

Brand	Moxa Technologies
Model	ioLogik E1200 Series
Category	Network Router
Language	English