Moxa Technologies ioLogik E1200 Series User Manual

1
1. Introduction
The ioLogik E1200 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow
information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain.
Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make
use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables and familiar
fieldbus protocols. The daisy-chain function on the ioLogik E1200 Ethernet remote I/O not only increases the
connections between machines and panels, but also lowers the cost of buying separate Ethernet switches, and
at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility
contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total
implementation cost.
The following topics are covered in this chapter:
 Product Features
 Inside the Box
 Product Model Information
 Product Specifications
 Common Specifications
 ioLogik E1210
 ioLogik E1211
 ioLogik E1212
 ioLogik E1213
 ioLogik E1214
 ioLogik E1240
 ioLogik E1241
 ioLogik E1242
 ioLogik E1260
 ioLogik E1262
 Physical Dimensions
 Hardware Reference
 Panel Guide
 Ethernet Port
 LED Indicators
 I/O Circuit Diagram
 DI Circuit
 Sinking DO Circuit
 Sourcing DO Circuit
 DIO Circuit
 Relay Circuit
 AI Circuit
 RTD Circuit
 TC Circuit

Moxa Technologies ioLogik E1200 Series Specifications

General

Brand	Moxa Technologies
Model	ioLogik E1200 Series
Category	Network Router
Language	English