Moxa Technologies ioLogik E1212 User Manual

ioLogik E1200 Series Initial Setup
2-8
AI
AO
ATTENTION
Use
the AO channel corresponding to the mode of operation you are using, as described above
(
e.g., voltage mode  VO, current mode  IO).
AO with external power
ATTENTION
24V of external power required in Analog output when loading exceeds 1000ohms.

Moxa Technologies ioLogik E1212 Specifications

General

Cable type	AWG
Module type	Digital
Channel type	-
Signal direction	Input/output
Power consumption	130 mA
Dimensions (WxDxH)	27.8 x 84 x 124 mm
Output current range	0 - 0.2 A
Ethernet LAN (RJ-45) ports	2
Supported network protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
Isolation	3 kV
Channels quantity	16 channels