Moxa Technologies ioLogik E1212 User Manual

ioLogik E1200 Series Activating the EtherNet/IP Function
5-2
Take the following steps to register a license and activate multiple devices:
Step 1: Assign the license file folder
To assign a folder in which to place the license file, click System  Options and then click the settings icon to
open the following window. Type in the path of the license folder, and then click OK.
Step 2: Get the device’s serial number
Locate the serial number on the ioLogik E1200 device. The device serial number can be found on the device
label, as shown in the picture below.

Moxa Technologies ioLogik E1212 Specifications

General

Cable type	AWG
Module type	Digital
Channel type	-
Signal direction	Input/output
Power consumption	130 mA
Dimensions (WxDxH)	27.8 x 84 x 124 mm
Output current range	0 - 0.2 A
Ethernet LAN (RJ-45) ports	2
Supported network protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
Isolation	3 kV
Channels quantity	16 channels