MiiNePort E2/E3 Utility Console and Driver Installation
Adding an additional server
Modify the text file moxattyd.cf to add an additional server. You may use vi or any text editor to modify the
file. For more configuration information, look at the file moxattyd.cf, which contains detailed descriptions of
the various configuration parameters.
Find the process ID (PID) of the program moxattyd.
# ps -ef | grep moxattyd
Update the configuration of the moxattyd program.
# kill -USR1 [PID]
(e.g., if moxattyd PID = 404, kill -USR1 404)
Execute the moxattyd program again to activate the new settings, as follows:
# /usr/etc/moxattyd/moxattyd -t 1
This completes the process of adding an additional server.
To Next Page
Loading...
