Moxa Technologies MiiNePort E2-H - Overview; Package Checklist

MiiNePort E2/E3 Introduction
1-2
Overview
Moxa’s MiiNePort E2/E3 embedded device servers are designed for manufacturers who want to add
sophisticated network connectivity to their serial devices, but with minimal integration effort. The MiiNePort
E2/E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet and
up to 921.6 Kbps serial baudrate. The MiiNePort E2/E3 comes with a versatile selection of ready-to-use
operation modes and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the
MiiNePort E2/E3 can be used to convert any device that has a standard serial interface to an Ethernet enabled
device in no time. In addition, compared with other products of this type, the MiiNePort E2/E3 has a very
compact size, making it easy to fit the MiiNePort E2/E3 into virtually any existing serial device.
Package Checklist
MiiNePort E2 Module Package (one of the following)
• MiiNePort E2: 0 to 55°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E2-H: 0 to 55°C operating temp., 50 bps to 921.6 Kbps baudrate
• MiiNePort E2-T: -40 to 85°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E2-H-T: -40 to 85°C operating temp., 50 bps to 921.6 Kbps baudrate
MiiNePort E2 Starter Kit Package
• MiiNePort E2 module (MiiNePort E2 or MiiNePort E2-H only)
• MiiNePort E2 evaluation board
• Universal power adapter
• 2 power cords
• Null modem serial cable
• Crossover Ethernet cable
• Document and software CD
• Quick installation guide (printed)
• Warranty card
MiiNePort E3 Module Package (one of the following)
• MiiNePort E3: 0 to 55°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E3-H: 0 to 55°C operating temp., 50 bps to 921.6 Kbps baudrate
• MiiNePort E3-T: -40 to 85°C operating temp., 50 bps to 230.4 Kbps baudrate
• MiiNePort E3-H-T: -40 to 85°C operating temp., 50 bps to 921.6 Kbps baudrate
MiiNePort E3 Starter Kit Package
• MiiNePort E3 module (MiiNePort E3 or MiiNePort E3-H only)
• MiiNePort E3 evaluation board
• Universal power adapter
• 2 power cords
• Null modem serial cable
• Crossover Ethernet cable
• 2 flat cables
• 1 screw and spacer pack
• Document and software CD
• Quick installation guide (printed)
• Warranty card
NOTE
Please notify y
our sales representative if any of the above items is missing or damaged..