Moxa Technologies MiiNePort E2-H - Product Features

MiiNePort E2/E3 Introduction
1-3
Product Features
All MiiNePort E2/E3 Series modules have the following general features:
• MiiNePort NetEZ Technology makes integration incredibly easy
• Moxa’s second generation MiiNe SOC optimizes reliability
• A versatile choice of operation modes to meet application needs
• Optional RJ45 package for specific requirements
• Extremely low power consumption for green design
• 802.3af compliant PoE pass-through (E3 model)
• Compact embedded device module
Moxa’s NetEZ technology is designed to give serial device manufacturers a range of powerful tools for
integrating Ethernet capability into serial devices.
Each of MiiNePort supports the NetEZ features below.
MiiNePort E2 MiiNePort E3
EZPower
 
SCM
 
EZPage
 
AutoCFG
 
MCSC

–
EZPower is an automatic power selector for the 3.3 VDC or 5 VDC power system input.
SCM (Serial Command Mode) can be used to easily configure the MiiNePort E2/E3 via a serial
communication interface, even after it’s installed in the serial device.