MR MSENSE DGA 2 - Page 86

11 Removal
Messko GmbH 202086 BA4001150/10 ENMSENSE
®
DGA 2/3
10. Clean the device with a dry cloth.
The device has now been removed and can be transported or stored in suit-
able packaging.
The ball valve is then to be secured:
CAUTION
Hot oil escape
Risk of injury and slipping.
► Ensure that the ball valve is closed.
► Wear safety clothing.
1. Open the air-vent valve of the ball valve dummy plug and insert the
dummy plug into the ball valve up to the stop.
Figure67: Inserting the dummy plug into the ball valve.