MSA M1 User Manual

When the BA wearer has noticed the evacuation request, the notification
has to be confirmed. The risk area must be left to get back to the ECP.
When a BA wearer has confirmed the evacuation request, that status on
the ECB changes from "received" to "confirmed".
3. When the BA wearers are back at the ECP, tap on the RESET
EVACUATION button.
The evacuation request is reset.
The BA wearers can now remain connected to the ECB for further
operation or be logged off from the ECB, refer to chapter 5.1 .
39
4 Use GB

MSA M1 Specifications

General

Type	Control Unit
Input Voltage	24 VDC
Operating Temperature	-20°C to +60°C
Protection Rating	IP65
Dimensions	150 x 100 x 50 mm
Weight	0.5 kg