Notification Display Description Actions to Acknowledge the
Alarm on the ECB
Motion alarm The man down alarm is
triggered automatically
from the Control Module
using the integrated motion
detection sensor based on
the predefined thresholds
in the control module.
Only full motion alarms are
transmitted to the ECB.
Confirm the notification.
The alarm will still be visible in the
related bar:
Manual alarm The BA wearer has
activated the alarm
manually.
Confirm the notification.
The alarm will still be visible in the
related bar:
Low pressure
alarm
The cylinder pressure level
of the BA wearer is below
75 bar.
No action necessary.
The BA wearer will hear a
continuous alarm and has to leave
the risk area.
46
GB 4 Use
To Next Page
Loading...
Need help?
General
