MTE HYDROCAL 1001 Plus - Connections of Power Supply Card

HYDROCAL 1001+ Installation and operation manual Page 23/76
3.4. Connections of power supply card
[1]
Connection terminal X1: Supply voltage / heating resistor
X1:1  Protecting earth (PE) - Green - yellow
X1:2  - (not connected)
X1:3  Neutral (N) - Blue
X1:4  - (not connected)
X1:5  Phase (L) – Black or brown
X1:6  - (not connected)
X1:7  Heating resistor connection - Red
X1:8  - (not connected)
Note: The connection terminal X1 is underneath the shielding cover of the power supply
card.
[2]
Micro fuse holder with micro fuse
120 V  T3.15A
230 V  T2A
Note: The micro fuse holder is underneath the shielding cover of the power supply card.