PROGRAMMING NOTE:
If ➞ RETURN TO MENU is displayed at any
time, press the ✚ key to return to SENTRY II,
and use the ▼ to scroll back to the desired
programmable option.
7. Press the ▼ key to scroll to the first
programmable selection, “Bottom
Refrigeration Unit Time Delay.”
NOTE: If you scroll past a programming
selection, use the ▲ key to scroll back to the
desired selection.
The MTA will display:
➞ Cond Bottm Unit
8. Press the ✚ key to display the current time
delay setting—0-120 minutes.
The MTA will display:
xx Minute Delay
9. Press the ✚ key to increase or the key to
decrease the “Bottom Unit Time Delay.”
Sentry II with Auto-Dosing Assembly Operating Instructions 43 Effective April 1, 2000
To Next Page
Loading...
