39. Press the ▼ key to scroll to the next option,
"Pre-Rinse Temperature.”
40. Press the ✚ key to display the current setting,
Cold or Warm.
41. Press the ✚ key to select Warm or the key
to select Cold.
42. Press the key to enter the selection.
43. Press the ✚ key to return to the main menu.
44. Press the ▼ key to scroll to the next option,
"Fifth Cycle On or Off.”
NOTE: This allows the Fifth-Cycle, Acid or
Sanitize, to be turned off for specific
International requirements.
Pre-Rinse, Rinse, Wash, Rinse, Fifth-Cycle—
On or Off
45. Press the ✚ key to display the current setting,
On or Off.
46. Press the ✚ key to turn the Fifth-Cycle On, or
the key to turn it Off.
47. Press the key to enter the selection.
48. Press the ✚ key to return to the main menu.
Sentry II with Auto-Dosing Assembly Operating Instructions 48 Effective April 1, 2000
▲
▲
Japan Program:
Skip to Step 53.
To Next Page
Loading...
