Mueller SENTRY II - Milk Temperature Display Function; Emergency Cooling Override

49. Press the ▼ key to scroll to the next option,
"Fifth Cycle Acid or Sanitize.”
NOTE: This selects Acid or Sanitize
Chemicals for the automatic Fifth Cycle, if
selected in the previous programming step.
50. Press the ✚ key to display the current setting,
Sanitize or Acid.
51. Press the ✚ key to introduce Sanitizer, or the
key to introduce Acid chemicals in the
Fifth-Cycle.
52. Press the key to enter the selection.
53. Press the ✚ key to return to the main menu.
54. Press the ▼ key to scroll to the next option,
"Acid/Sanitize Cycle Fill Temperature.”
Japan Program: “Sanitize Temp.”
55. Press the ✚ key to display the current
settings, Cold or Warm.
56. Press the ✚ key to select Warm or the key
to select Cold.
57. Press the key to enter the selection.
58. Press the ✚ key to return to the main menu.
Sentry II with Auto-Dosing Assembly Operating Instructions 49 Effective April 1, 2000
▲▲