14 Part Number STH034 3/12
The Company's warranty hereunder with respect to
compressors shall apply for an additional forty-eight
months, excluding all labor charges.
The Company's warranty hereunder with respect to
any blender assembly shall apply for one year or
13,000 blender cycles, whichever occurs first,
including labor. At 13,000 blender cycles a blender
assembly preventative maintenance (PM) service is
required. It is the responsibility of the Owner to
complete and pay for this PM. If the blender assembly
has accrued 13,000 cycles prior to expiration of the
initial one year warranty period, then once the PM is
completed in compliance with the instruction manual,
the warranty will continue to be valid for the remainder
of the one year warranty period or accumulation of
another 13,000 cycles, whichever occurs first.
During the warranty period, the Company shall, at
Company's option, repair or replace parts,
components or assemblies determined by the
Company to be defective in material or workmanship.
This warranty is further limited to the cost of parts,
components or assemblies and standard straight time
labor charges at the servicing location.
To Next Page
Loading...
