88 Part Number STH034 3/12
Firmware Update Procedure
1. Read Instructions Completely
2. Firmware file (.bin) must be loaded on top level
of flash drive.
3. Require only 1 firmware (.bin) file on the flash
drive at a time. If multiple firmware (.bin) files
are on the flash drive, the first one in
alphabetical order would be loaded and may
not be the current version.
5. Flash Drive must be formatted to FAT or FAT16
file format. (Typical for smaller flash drives
<1GB).
1 Plug in Flash Drive (above
upper left corner of
screen).
2 Press the Managers Icon.
3 Enter Password, “A”.
4 Press the Green Check.
5 Press the Page Down
Icon.
To Next Page
Loading...
