60 Part Number STH034 3/12
Pause for the Sanitation Hold
Time.
Purging instructions:
1 Disconnect the cleaning
hoses from the product
nozzles
2 Press the green check
Air is pushed through each line
(slot) blowing out any remaining
liquid. The screen will read
Purging Slot X. Each slot will
change from Sanitized to
Purged.
Reinstall inventory:
1 Retrieve product
holders from walk in
2 Reinstall each product
holder into correct slot
3 Remove splash guard
from dispense area
4 Reinstall center grate
under dispensing area
Press the down arrow to
continue.
5 Place a large cup under
dispensing nozzles
To Next Page
Loading...
