Multiplex MB-8-1 - Page 65

Part Number STH034 3/12 65
Blender sanitizing:
1 Remove cup from each
blender station and pour
wash solution down the
drain and verify
dispense area drains
completely
2 Place cup with sanitizer
solution in both blender
stations
3 Press the green check
Sanitizing will display on the
screen
Mixer station sanitize:
1 Remove cup from each
blender station and pour
sanitizing solution down
the drain
2 Spray all mixer station
inside surfaces with
sanitizer solution
3 Allow to air dry
4 Do not wipe off
sanitizer!
5 Repeat for other side
Press the down arrow to
continue.
