Munters Trio Poultry Controller User Manual

© Munters AB, 2020 143
b. If required, enable non-brood heaters and define the set point. These heaters are mapped
to those sensors not mapped to the brooding area temperature sensors (next step).
2. Go to Flock > Flock Settings.
3. In Growing Stage, select Brooding.
4. Go to System > Temperature Definition (temperature sensors must be defined).
5. Map temperature sensor(s) to the brooding area.

Munters Trio Poultry Controller Specifications

General

Brand	Munters
Model	Trio Poultry Controller
Category	Controller
Language	English