Munters Trio Poultry Controller - Defining the Water Meter Sensor

© Munters AB, 2020 64
7.4.4 D
EFINING THE
W
ATER
M
ETER
S
ENSOR
 Define one analog output port as a water meter (refer to Mapping Devices, page 50).
•
Define:
o
Quan/Pulse: Set the water meter’s water flow per pulse. Range: 0.0 to 99.9 (unit
depends on the Defining the Preferences, page 95.)
o
Meter input: Chose drinking water or cooling.
o
Enable Mode: Enable/disable the sensor.