Munters Trio Poultry Controller - Defining the same as Relays

© Munters AB, 2020 70
7.8 Defining the Same As Relays
 Define up to 20 relays as Same as Relay (refer to Mapping Devices, page 50).
This function enables defining a relay to operate using the parameters defined for another relay. A relay
can be tied to any other relay.
•
Define:
o
Related: Define which relay number to follow. Range: 1 – 20
o
KWh: This field displays the amount of kilowatts used. Read-only.
o
Operation: Define the relay mode.