Munters Trio Poultry Controller - Defining the Light Sensor; Feeding Devices

© Munters AB, 2020 76
7.12.3 D
EFINING THE
L
IGHT
S
ENSOR
•
Define;
o
Enable Mode: Enable/disable the sensor.
7.13 Feeding Devices
Setting up a feed system requires auger relays and sensors, and feeder relays and sensors. Define:
•
Auger and feed relays to control the auger/feeder lines.
•
Auger digital sensors to detect auger overtime issues: silo is empty, feed lines are stuck, or other
mechanical issue.
o
Auger 1 is automatically associated with Augur Active Sensor 1. Auger 2 is
automatically associated with Augur Active Sensor 2.
o
Feeder 1 active is associated to feeder 1 relay, feeder 2 active to feeder 2 relay, etc.
•
Defining the Auger Relays
•
Defining the Auger Active Sensors
•
Defining the Feeder Relays
•
Defining the Feeder Active Sensors