Munters Trio Poultry Controller - Timers

© Munters AB, 2020 162
20 Timers
Timers provide an additional method of controlling relay devices, namely setting a time table in which the
device can operate. In addition to the time table, TRIO enables setting up time cycles and temperature
ranges in which a device can operate.
TRIO supports up to five timers.
 Define at least one relay as a timer in Mapping Devices, page 50.
1. In Control > Timers, click edit, define a timer as Active.
2. Define for each timer:
o
Time: Timers can run 24 hours a day or in user-defined time frames. Define up to four
time frames for each timer.
o
Cycle: If enabled, define the cycle times. Range: 0 – 999 seconds.
o
Temperature: If enabled, define the temperature range in which the timers operate.
Range [-40° - +90°].