MANUAL ENGLISH
for devices of the IMPACT67 series Art.-No. 55150 | 55151 | 55152 | 55170 | 55171 | 55172
4 / 145
6 Installation 39
6.1 Electrical Installation of the Module 39
6.1.1 Sensors and actuators 40
6.1.2 Connecting the Ethernet bus 42
6.1.3 Power supply connection 43
6.2 Ensuring Tightness (IP67) 44
7 Start-up 45
7.1 Loading GSDML Files 45
8 Configuration/settings 48
8.1 Module configuration 48
8.2 Module parameterization 56
8.2.1 Module parameters 56
8.2.2 Diagnostic parameters 58
8.2.3 Tool parameters 65
8.2.4 General parameters 66
8.2.5 Description of the parameters of the IO-Link ports 72
8.3 IO-Link configuration 83
8.4 Cyclic and acyclic communication 85
8.4.1 Acyclic IO-Link access 86
8.4.2 I&M data 87
8.4.3 IO-Link function block 90
8.5 Basic setting 94
8.6 Project planning of the Fast Start Up 103
8.7 Media redundancy (MRP) configuration 105
8.8 Isochronous real time (IRT) configuration 110
8.9 Shared Device configuration 113
8.10 SNMP 117
8.11 PROFIenergy configuration 117
9 Operation 118
9.1 Diagnostic 118
9.1.1 LED indications 118
9.1.2 Extended LED indications 123
9.2 PROFINET Diagnostics 127
9.2.1 General diagnostic messages 128
9.2.2 General diagnostic messages at IO-Link ports 128
9.2.3 Diagnostic messages at IO-Link ports 129
9.2.3.1 According to IO-Link integration guideline Edition 1 129
9.2.3.2 Murrelektronik IO-Link - Integration and extended integra-
tion 131
9.3 Maintenance and cleaning 140
To Next Page
Loading...
Need help?
General
