Configuration/settings
User manual 55170_hdb_en_13 103 / 145
8.6 Project planning of the Fast Start Up
Topology To configure the module for the Fast Start-Up (FSU) and to achieve the
desired run-time characteristics, several steps are needed. The correspond-
ing parameters are set directly in the module.
Select the module in the Topology view.
Fig. 8-32: Topology
Activation of the priori-
tized startup
Fig. 8-33: Enabling prioritized startup
Activate the menu option Prioritized startup.
This activates the fundamental FSU functionality for the module.
To Next Page
Loading...
